Sony MHC-RX55 - Manual (Page 12)

12
To Do this
Stop play Press p.
Pause Press CD (P (or P on the
remote). Press again to resume
play.
Go to the next During play or pause, turn the
track or go jog dial clockwise (to go
back to the forward) or counterclockwise
start of the (to go back). (Or press + (to
current track go forward) or = (to go
back) on the remote.)
Find a point in Press and hold down ) or
a track 0 during play and release it
at the desired point.
Select a CD Press DISC SKIP.
in stop mode
Play only the Press PLAY MODE repeatedly
CD you have until “1 DISC” appears.
selected
Play all CDs Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove the CD Press 6 in stop mode.
Exchange other Press 6.
CDs while
playing
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• Pressing CD (P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD (P or the DISC 1 – 3 buttons (Automatic
Source Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1 – 3 button for that tray lights
green. When all disc trays are empty, the DISC
1 – 3 buttons all light green.
Playing a CD (continued)