Sony DCR-TRV520 - Manual (Page 119)

119
Additional Information
Removing dust from inside the viewfinder (DCR-TRV520 only)
(1) 1Remove the screw with a screwdriver (not supplied). 2Then, while holding
the RELEASE knob up, 3turn the eyecup in a counterclockwise direction and
pull it out.
(2) Clean the surface with a commercially available blower for a still camera.
(3) Turn the eyecup in a clockwise direction, then replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
Maintenance information and precautions