Sony HDR-TG1 User Manual

Page 56

• Refer also to the instruction manual of the

printer to be used.

• Do not attempt the following operations when

is on the screen. The operations may not be

performed properly.
– Close the LCD panel
– Press POWER
– Operate the

(Movie)/

(Still) select

switch

– Remove your camcorder from the Handycam

Station or the Dedicated USB Terminal
Adaptor

– Disconnect the USB cable from your

camcorder, the Handycam Station, the
Dedicated USB Terminal Adaptor or the
printer

• If the printer stops working, disconnect the USB

cable, turn the printer off and on again, and
restart the operation from the beginning.

• You can select only the paper sizes that the

printer can print.

• On some printer models, the top, bottom, right,

and left edges of images may be trimmed. If you
print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.

• Some printer models may not support the date

printing function. Refer to your printer’s
instruction manual for details.

• The still images described below may not be

printed out:
– The still image edited by a computer
– The still image recorded by other devices
– The still image file exceeding 4 MB
– The still image file larger than 3,680 × 2,760

pixels

Tips

• PictBridge is an industry standard established

by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.

• You can print a still image on the still image

playback screen from

(OPTION) MENU.