Step 3: adjusting the picture size and position, Fits the screen, Plug the ac power cord into a wall outlet – Sony VPL-HS3 User Manual
Page 15: Press the [ / 1 (on/standby), Switch to turn on the projector, Turn on the equipment connected to the projector, Press input to project the picture on the screen
Con
n
ect
ions a
n
d
P
repar
ati
o
n
s
15
GB
Step 3: Adjusting the Picture Size and Position
Tip
The ? /
1
(on/standby), INPUT, MENU, and
M/m/
ENTER (joystick) buttons on the side panel of the projector have
the same functions as those on the remote control.
1
Plug the AC power cord into a
wall outlet.
The ON/STANDBY indicator lights in red and
the projector goes into standby mode.
2
Press the
[
/
1
(on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the input
indication changes. (
Step 3: Adjusting
the Picture Size
and Position
+
–
+
–
INPUT
LIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
USER 3
USER 1
DDE
MENU
APA
MUTING
VOLUME
SIDE SHOT
RESET
WIDE MODE
ENTER
5,7
5,8
Ajuster lock lever
Front remote control
detector
4
Rear remote control
detector
7
2
M/m/
ENTER buttons
RESET button
ON/
STANDBY
Lights in red.
ON/
STANDBY
Lights in green.
NTSC 3.58
V i d e o 1
INPUT