AEG CG 6400 - Manual (Page 10)

g
36
• Caution! Danger of scalding when the
steam nozzle is activated! Hot water
or steam output can cause scalding.
Activate the steam nozzle only when
you are holding a container under the
nozzle.
• Do not use steam to heat inflammable
liquids!
• Only use the coffee machine with
water in the system! Fill the water tank
only with cold water. Do not use hot
water, milk or other liquids. Do not
exceed the maximum fill level of
approx. 1.8 litres.
• Do not put frozen or caramelised cof-
fee beans in the bean container. Use
only roasted coffee beans! Remove any
foreign bodies from the coffee beans.
Failure to do this invalidates the guar-
antee.
• Spoon only ground coffee into the
ground coffee filler.
• Do not leave the coffee machine
switched on unnecessarily.
• Do not expose the coffee machine to
the effects ofweather.
• When using an extension lead, use only
a commercially available cable with a
conductor cross-section of at least
1.5 mm
2
.
• To avoid injury, people with motor sys-
tem disorders should never use the
machine without an accompanying
person.
• Operate the machine only when the
drip tray, waste coffee container and
the drip grid are installed!
Safety in cleaning and care
• Follow the cleaning and descaling
instructions.
• Switch off the coffee machine and
unplug it from the mains socket before
carrying out any maintenance or
cleaning!
• Do not immerse the coffee machine in
water.
• Only clean the steam nozzle when the
machine is switched off, cold and not
under pressure!
• Do not clean coffee machine parts in
the dishwasher.
• Never put water in the grinder. This
would damage the grinder.
Never open or repair the coffee
machine. Faulty repairs can result in
considerable hazard to the user.
Repairs to electrical appliances must be
carried out only by qualified service
engineers.
If a repair becomes necessary, includ-
ing replacement of the mains lead,
please contact
• the dealer where you bought the cof-
fee machine, or
• the AEG/Electrolux Service Line.
If the machine is misused or incor-
rectly operated the manufacturer
accepts no liability for damage and
the guarantee is invalidated - like-
wise if the descaling program is not
carried out in accordance with these
operating instructions immediately
after the message «PLEASE DES-
CALE!» is displayed.
822_949_344 CG6400.book Seite 36 Mittwoch, 25. Oktober 2006 12:38 12