Allied Telesis AT-IMG616RF/RF+ - Manual (Page 14)

AT-iMG616RF/RF+ Series Multiservice VoIP Gateway - User Manual 15
4.2. Telephone cord, UTP cable and TV cable
There are 3 kinds of user connection cables: telephone cables, Unshielded Twisted Pair (UTP)
cables used for data and TV coax cable for TV set.
See Below.
This product does not include any LAN, phone or TV cables.
The service provider or end user must provide these.
FIGURE 8: TELEPHONE CABLE
Note: The telephone cable uses the RJ11 connector
CAUTION: To reduce the risk of fire, use only No. 26AWG or
larger telecommunication line cord.
FIGURE 9: LAN CABLES
Use UTP cable category 3 or higher on 10Base-T, and UTP
cable category 5 or higher on 100BASE-TX.
There are two types of LAN cable, straight cable and crossed
cable; for the AT-iMG616RF/RF+, it does not matter which of
these types of LAN cable you use. The LAN interfaces on the
AT-iMG616RF/RF+ can auto-sense whether the cable is
straight or crossed.
If you buy a new cable, it is recommended that you choose
UTP cable - category 5 or higher