Sony PEG-TG50 - Manual (Page 17)

17
S
e
tt
ing y
o
ur
S
o
ny CLIÉ
™ handheld
Notes
• Always use the point of the stylus for tapping or making strokes on the CLIÉ
handheld screen. Never use a real pen, pencil, or other sharp object to write on
the screen.
• When you put the stylus back in its holder, push it in until it clicks into place.
3
Press lightly on the screen with the stylus.
This action is called “tapping.”
The
Setup screen for digitizer calibration is displayed.
4
Following the on-screen instruction, tap the center of the
displayed mark.
Also tap the center of the following displayed targets in the lower right
corner and the center of the screen.
Note
If the digitizer is not configured correctly, the
scroll bar may not operate properly, “tapping”
may not work as expected, or other problems
may occur. For re-configuring the digitizer, refer
to “Customizing your Sony CLIÉ™ handheld
(Preferences): Adjusting the Digitizer” in the
“Handbook.”
After calibration is completed, a screen for setting the time and date
appears.
Press lightly on the
screen (Tap)
b
Continued on next page
• • • • • • • • • • • • • • • • • • • • •