Sony HDR-HC3 - Manual (Page 75)

75
HDR-HC3
2-661-355-11(1)
E:\SONY\2661355111\01US07BAS.fm
D
u
b
b
ing/
Edi
ting
Jacks on your camcorder
Open the jack cover and connect the cable.
Using an i.LINK cable (optional)
The dubbed format (HDV/DV) differs depending on the recording format or the format
supported by the VCR/DVD device. Select the required settings from the table below and
make the menu settings.
• Disconnect the i.LINK cable before changing these menu settings, otherwise the VCR/DVD device may
not correctly identify the video signal.
Copy format
Camcorder
recording
format
Format supported by the
VCR/DVD device
Menu setting
HDV format* 1 DV format
[VCR HDV/DV]
(p. 65) [i.LINK CONV]
(p. 68)
Copy HDV recording as
HDV
HDV HDV –* 3
[AUTO]
[OFF]
Convert HDV recording
to DV
HDV DV DV
[ON (HDV
t DV)]
Copy DV recording as
DV
DV DV DV [OFF]
When tape is recorded in both HDV and DV format
Convert both HDV and
DV format to DV
HDV/DV DV DV [AUTO]
[ON (HDV
t DV)]
Copy only portions
recorded in HDV format HDV HDV –* 3
[HDV] [OFF]
DV –* 2 –* 3
Copy only portions
recorded in DV format HDV –* 2 –* 2
[DV] [OFF]
DV DV DV
* 1 Recording device compliant with the HDV1080i specification.
* 2 The tape advances, but no video or sound is recorded (blank).
* 3 Picture is not recognized (no recording is made).
2
1
Continued ,