Sony NW-E407 - Manual (Page 24)

24
Repeat mode
Playing specified
sentences repeatedly
(Sentence Repeat)
This function automatically detects voice
data between blank spaces (silent spaces) and
repeats the voice data for a set number of
counts. This is useful for language-learning
material which has no background music.
z Tip
The default repeat count setting is 2 times for one
sentence. But you can change the repeat count
setting. Refer to “Setting the repeat count” on page
25.
1
Select the Sentence Repeat mode
(Sentence Rep) (page 21).
2
Press the Nx button to start
playback.
3
Press the REPEAT/SOUND button
to place the setting point during
playback.
The Network Walkman detects the
speech up to the next blank space (silent
section) and repeats the spoken section
according to the repeat count you set
(page 25). For example, if you set the
repeat count to 3, you will hear each
spoken section 4 times- the first time
plus 3 repeats.
2
Artist 1/32
01:23
Track 1
Notes
• A spoken or silent section of less than 1 second
will not be detected.
• If a spoken section continues up to the very end
of a track (with no blank), then that point (end of
track) is regarded as the end of that spoken
section and it is repeated.
To clear the setting point
• Press the REPEAT/SOUND button during
Sentence Repeat playback.
• Press the SEARCH/MENU button during
Sentence Repeat playback.
• Set the Shuttle switch to the GROUP position to
select the Group Control Mode during Sentence
Repeat playback.
• Select the previous or next track by rotating the
Shuttle switch during Sentence Repeat playback.
(The Sentence Repeat mode is not canceled.)
To cancel the Sentence Repeat mode
Change the Repeat mode in the menu screen (page
21).
Nx button
REPEAT/SOUND
button