Sony LF-X11 User Manual
Page 18
Setting
Up th
e Lo
catio
nFree
Pla
y
e
r
18
6
Save your settings.
Press the
button to save the channel
information you entered on the PSP™
system.
You can adjust settings for the on-screen remote
control that will be used to operate devices such
as video decks or DVD players that are connected
to the Base Station.
To adjust these settings, you must first save
remote control data on Memory Stick Duo™
media (
For information on connecting the IR blaster or
other devices, refer to the Operating Instructions
document supplied with the Base Station.
1
Check that you have inserted Memory
Stick Duo™ media that contains
remote control data in the PSP™
system.
2
Select
from the LocationFree
Player control panel (
1 page 9), and
then press the
button.
3
Select [Remote Control Settings], and
then press the
button.
The setting screen for the remote control is
displayed.
4
Select [Video 1] or [Video 2] for the
connected device you want to use the
remote control for, and then press the
button.
z
Tips
• Under [Version Information], you can check
the version number of the remote control data
that is saved on the Memory Stick Duo™.
• You can set only one remote control each for
[Video 1] and [Video 2] in the PSP™ system.
You cannot however set multiple remote
controls for either setting.
5
Select the manufacturer of the
connected device, and then press the
right button.
Adjusting Settings for the
Remote Control of a
Connected Device