Sony VPL-HW40ES - Manual (Page 48)

48
This unit has default image data to adjust preset data for input signals appropriately
according to the signals shown in “Preset Signals” (
1 page 64) (the preset memory).
When the preset signal is input, the projector automatically detects the signal type and
recalls the data for the signal from the preset memory to adjust it to an optimum picture.
The memory number and signal type of that signal are displayed in the Information
menu.
You can also adjust the preset data through the Screen
menu.
This projector also contains 20 different user memories beside the preset memories used
for inputting analog computer signals. You can save input signals that have not been preset
on these user memories.
When an unpreset signal is input for the first time, a memory number is displayed as 0.
When you adjust the data of the signal in the Screen
menu, it will be registered to the
projector. If more than 20 user memories are registered, the newest memory always
overwrites the oldest one.
See the chart on page 64 to find if the signal is registered to the preset memory.
When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed
in black.
About the Preset Memory No.
Note