Sony PCG-C1VP - Manual (Page 44)

Change text in this variable to document title as each document is created.
44
To connect the optical Drive
1 Remove the PC card slot protector from the PC Card slot. See “To remove
the floppy disk drive when the computer is on” on page 42 for details.
2 Remove the PC Card from the bottom side of the CD drive.
3 Insert the PC Card into the PC Card slot with the SONY logo facing up. See
“Using PC Cards” for details.
✍
You can connect a PCGA-CD51/A CD-ROM drive while the computer is on, unless
you want to use the Application, Driver, and System Recovery CDs. Turn off your
computer before using the Recovery CDs.
Procedures for connecting the optical drive may vary, depending on the drive.
See the manual that came with your optical drive for more information on its use.
Removing PC Card
Inserting PC Card
✍
A protective cover is attached to the lens of the CD-ROM drive at the factory. Before
using the CD-ROM drive, remove the protective cover.