Sony COM-1 - Manual (Page 18)

COM-1.US.2-668-392-11(2)
18
Step 2: Setting up Your Personal Communicator
Turning on your unit
Slide down and hold the POWER switch until the POWER indicator lights up
green. The start-up screen appears for about 30 seconds. When you use your
Personal Communicator for the first time, the initial set-up wizard appears.
Once the initial set-up is completed, the set-up wizard will no longer appear
when the unit is turned on.
POWER switch
POWER indicator
To turn it off
Slide down and hold the POWER switch again. Your unit turns off, and the
POWER indicator turns off.
Note
• Do not remove the battery and disconnect the AC power adaptor while the start-up
screen is displayed.
• The unit cannot be turned off while the HOLD feature is on. You can, however, turn on
the unit while the HOLD feature is on by sliding down and holding the POWER switch.