Sony COM-1 User Manual

Page 17

ara

tio

COM-1.US.2-668-392-11(2)

Connection using the supplied USB cable

To  (USB)

connector

USB cable (supplied)

Notes

• If your unit is connected to your computer via the included USB cable and the computer

enters a power saving mode (such as system suspend, sleep, or hibernation), then your
unit’s battery will begin discharging.

• Do not leave the unit connected for extended periods to a notebook computer that is not

connected to AC power, because the unit may discharge the computer’s battery.

• If the unit does not automatically turn on when you connect it to your computer using

the USB cable, wait a few minutes, and then turn it on by sliding the POWER switch
down ( page 18).

• Connecting the unit via a USB hub may not work and is not supported. Connect the

USB cable directly to the computer.

• If “Auto Power Off” is set to “NO,” and the unit is connected to the AC power adaptor, a

complete charge may require 7.5 hours or longer.

• Charging may take a long time if you operate the unit while it is charging.

Continued 