Sony DCR-TRV250 - Manual (Page 121)

121
Editing
Using the i.LINK cable
You can record a tape from a VCR that has DV outputs. Use your camcorder as a
recorder.
Simply connect the i.LINK cable (optional) to DV of your camcorder and to DV OUT
of the DV products. With a digital-to-digital connection, video and audio signals are
transmitted in digital form for high-quality editing.
(1) Insert a blank tape for recording into your camcorder, and insert the recorded
tape into the VCR.
(2) Set the POWER switch to VCR on your camcorder.
(3) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(4) Press N on the VCR to start playback.
The picture to be recorded appears on the screen of your camcorder.
(5) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable.
When you dub a picture in digital form
The color of the display may be uneven. However, this does not affect the dubbed
picture.
Recording video or TV programs
DV
DV OUT
DV
3
PAUSE REC
: Signal flow
i.LINK cable
(optional)
is marked on
this side.
VCR