Hardware setup – Asus A7VL133-VM User Manual

Page 28

Text mode
Original mode

ASUS A7VL133-VM User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

3) Universal Serial BUS Ports 0 & 1 (Black two 4-pin USB)

Two USB ports are available for connecting USB devices. For additional USB
ports, you can use the USB headers (see USB Headers later in this section) and
mount it to the chassis.

5) Monitor Output Connector (Blue 15-pin VGA)

This connector is for output to a VGA-compatible device.

4) Parallel Port Connector (Burgundy 25-pin PRINTER)

You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.

Universal Serial Bus (USB) 2

USB 1

Parallel (Printer) Port (25-pin female)

VGA Monitor (15-pin female)