Sony SU-B463S - Manual (Page 3)

3 US
Before assembling
• Be sure to have a Phillips screwdriver that fits the screws
prior to the assembly.
• When using an electric
screwdriver, set the torque
setting to approximately
1.5 N·m {15 kgf·cm}.
Step 1:
Checking the parts
Name Quantity
Stand
1
Joint
1
Neck
1
TV Stand Neck Attachment
Screw
(PSW5 Ч 16) (Ч 3)
Joint Screw
(PSW5 Ч 16) (Ч 3)
Neck Screw
(PSW5 Ч 16) (Ч 4)
10
Instructions manual 1
Refer to the operating instructions supplied with
your TV for information on how to remove the
Table-Top Stand from the TV.
Step 2:
Installing the TV
1
Attach the Neck to the TV Stand
with the four Neck Screws
(PSW5 × 16) (supplied).
2
Prepare the TV.
When moving the TV, be sure that two or more
persons install the TV on the TV Stand as
shown in the illustration. If one person does
the installation work alone, this may result in
an accident or injury.
12 cm ~
Neck
Neck Screw
(PSW5 × 16) US
Englis
h
(Continued)