Sony DCR-HC21 - Manual (Page 23)

23
Recording/Playback
DCR-HC21 2-584-905-11(1)
• A mirror-image of the subject appears on the
LCD screen, but the picture will be normal
when recorded.
To use a tripod ........................
Attach the tripod (optional: the length of
the screw must be less than 5.5 mm (7/32
inches)) to the tripod receptacle
 using a
tripod screw.
Playback
To play back the images with added
special effects .........................
See [P EFFECT] on page 40.
Recording/playback
To check the remaining battery
(Battery Info) ..........................
Set the POWER switch up to OFF (CHG),
then press DISP/BATT INFO
. The
battery information appears for about 7
seconds. Keep the button pressed to view it
for about 20 seconds.
Remaining battery (approx.)
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER
:
:
64
84
min
min
0% 50% 100%
Recording capacity (approx.)
To turn off the operation confirmation
beep ....................................
See [BEEP] on page 46.
To initialize the settings .............
Press RESET  to initialize all the
settings, including the setting of the date
and time.
Other part names and functions
 Speaker
Sounds come out from the speaker.
• For how to adjust the volume, see page 21.
 REC lamp
The REC lamp lights up in red during
recording (p. 47).
 Remote sensor
Point the Remote Commander (p. 28)
towards the remote sensor to operate
your camcorder.
 Internal stereo microphone