Shooting still images/movies, Cyber-shot user guide – Sony DSC-TX200V User Manual
Page 243
![background image](/manuals/444023/243/background.png)
Search
Top page > Troubleshooting > Troubleshooting > Shooting still images/movies
Shooting still images/movies
Cannot record images.
If images are recorded on the internal memory even when a memory card is inserted into the camera,
make sure that the memory card is fully inserted into the camera.
Check the free capacity of the internal memory or memory card. If it is full, do one of the following:
Delete unnecessary images.
Change the memory card.
You cannot record images while charging the flash.
When recording movies, it is recommended that you use the following memory cards:
“Memory Stick Micro” (Mark2) media
microSD memory card or microSDHC memory card (Class 4 or faster)
Set [Demo Mode] to [Off].
Smile Shutter function does not work.
No image is shot if a smiling face is not detected.
Set [Demo Mode] to [Off].
Anti-blur function does not work.
The anti-blur function may not work properly when shooting night scenes.
Shoot after pressing the shutter button halfway down.
Recording takes a long time.
When the shutter speed becomes slower than a certain speed, for example, when you shoot images
in dark locations, the camera automatically reduces the image noise. This function is called NR
(noise reduction) slow shutter and the shooting time takes longer.
The image is out of focus.
The subject is too close. When shooting, make sure to position the lens farther away from the subject
than the shortest shooting distance in the following situation.
In Intelligent Auto mode, Superior Auto mode, Easy Mode: approximately 3 cm (1 3/16 inches) (W)
/ 60 cm (1 ft 11 5/8 inches) (T) (from the lens)
In other shooting modes: approximately 8 cm (3 1/4 inches) (W) / 60 cm (1 ft 11 5/8 inches) (T)
(from the lens). Or set to close focus mode and shoot about 3 cm to 20 cm (1 3/16 inches to 7 7/8
inches) from the W side distance.
(Landscape),
(Night Scene) or
(Fireworks) mode is selected in the Scene Selection when
shooting still images.
Zoom does not work.
243