Position information (dsc-tx200v only), Cyber-shot user guide – Sony DSC-TX200V User Manual
Page 137
Search
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Position Information (DSC-
TX200V only)
Position Information (DSC-TX200V only)
GPS triangulating status can be checked. Set the camera to triangulate when the position information is
being displayed.
1. MENU
(Position Information)
Displays the triangulating information on the screen.
On the GPS indicators
The indicator
(A) changes according to the strength of GPS signal reception when GPS is activated.
GPS
indicators
Triangulating
status
GPS reception status
No indicator Off
[GPS setting] is set to [Off] or an error occurred.
Difficult
Your camera cannot find a GPS signal, therefore, it cannot acquire the
location information. Use your camera in an open area.
Searching
Searching for GPS satellites. It may take several minutes to start
triangulating.
Triangulating
During GPS triangulating, displays latitude / longitude
(B).
Satellite and positioning indicators
Satellite position and acquiring status of orbital information
(C) can be checked on the position
information display. Up to 4 indicators which show satellite information-acquiring status are displayed on
the positioning indicator
(D).
The color of satellite indicator and positioning indicator change according to the positioning status.
Green-colored indicator shows that camera is triangulating.
Notes
Even when the camera acquires information from satellites, triangulation may take time or fail
according to the time or place.
In searching the satellite positions, or triangulating, its may fail when you put your fingers on the
137