Sony NAS-CZ1 - Manual (Page 10)

10 GB
b
Installing the PCLK-MN10-dedicated driver
When “PCLK-MN10” appears in the dialog box, click “Next,”
and then load the M-crew CD-ROM into the CD-ROM drive.
2
Select “Search for the best driver for your device. (Recommended)”
and click “Next.”
A dialog box for selecting the search location appears.
3
Check “Specify a location:” and enter “D:\Driver.”
Note
The drive name (“D:” in step 3) depends on your computer’s configuration.
Enter the name of the CD-ROM drive of your computer.
If you do not know the drive name, click “Browse” after selecting “Specify a
location:.” The following window appears. Double-click “M_crew” under
My Computer, and then select “Driver” and click “OK.”