Recording to a tape – Sony CMT-EP50 User Manual
Page 14

14
Steps
Recording from a CD
(CD Synchro Recording)
Recording from the radio
1
Load a blank tape.
2
Press CD.
3
Load the CD you want to record.
4
Press
z
.
The deck stands by for recording.
5
Press
nN
, if you want to switch the direction.
6
Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select
g
to record on one side,
h
to record on both sides.
7
Press
z
again.
Recording starts.
Recording to a tape
–– CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
To stop recording
Press x.
Tips
• For recording from a CD to a tape manually, you
can press . m or M > to select tracks
during recording pause mode (after step 4 and
before step 6).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When an AM program is noisy, set ISS to select the
position that most decreases the noise.
Press TUNER (TUNER/BAND on the
remote).
Tune in the station you want to record.