Sony VPL-HW15 - Manual (Page 18)

18
2
Press the ? / 1 (ON/STANDBY)
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, “Starting...” appears on the
screen.
3
Display a test signal for
performing adjustments.
Press the LENS button on the remote
control to display the test signal.
Tip
The test signal is displayed for 1 minute.
Press the
button to clear the test signal
display before that.
4
Move both lens shift dials to
adjust the picture position.
Flashes in green for
a while (tens of
seconds) and then
lights in green.
To adjust the vertical
position
To adjust the horizontal position