Sony DSC-W90 - Manual (Page 63)

63
Cu
st
om
iz
in
g th
e s
e
tt
in
gs
Settings For details on the operation 1 page 56
Main settings — Main Settings 2
The default settings are marked with .
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable for multi-use terminal.
Selects the video signal output type from SD and HD(1080i), according to the TV or video
equipment connected see page 70.
USB Connect
PictBridge Connects the camera to a PictBridge compliant printer
(page 93). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the
recording folder on the camera are copied to the computer.
(with Windows XP, Mac OS X)
Mass Storage Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 77).
Auto The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 77 and 93).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the setting to [Mass
Storage].
COMPONENT
HD(1080i) Selects this item to connect the camera to a 1080i-capable
High Definition TV.
SD Selects this item to connect the camera to a TV or video
equipment that is not compatible with an HD(1080i) signal.