Sony DSC-W90 - Manual (Page 47)

47
Usi
n
g
fun
ctio
ns
for
sh
oo
tin
g
Shooting menu For details on the operation 1 page 35
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions. In such a case, you can correct
the red-eye phenomenon using [Retouch] in the viewing menu after shooting (page 52).
• When the Face Detection function is not used, the Red Eye Reduction will not function even when [Auto]
is selected.
Selects the anti-blur mode.
• In Auto Adjustment mode, [SteadyShot] will be set to [Shooting].
• For movies, the options are limited to [Continuous] and [Off].
The default setting is set to [Continuous].
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Select the settings for the shooting function. These items appearing in this menu are same ones
as those in [
Shooting Settings] on the HOME screen. See page 34.
SteadyShot: Selecting the anti-blur mode
(Shooting) Activates the anti-blur function when pressing the shutter
button halfway down.
(Continuous) Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
(Off) Does not use anti-blur mode.
SETUP: Selecting the shooting settings