Sony HCD-GS100 - Manual (Page 17)

Tape
17 US
Loading a tape
You can use only TYPE I (normal) tape.
1
Press Z PUSH on the tape deck.
2
Insert a tape with the side you want to
play/record facing up.
Other Operations
To Do this
Tape
With the side you want to
play/record facing up
Playing a tape
1
Load a tape.
2
Press TAPE.
3
Press N (or n N on the remote).
Tape playback side
Stop play Press STOP x (or x on the
remote).
Pause Press PAUSE X (or X on the
remote). Press again to
resume play.
Fast-forward
or rewind Press m or M.
Remove
the cassette Press Z PUSH on the tape
deck in stop mode.
Note
If the system stops during tape playback or recording
due to a power failure or other reason, do not attempt
to forcibly eject the tape as this may damage the
heads. Wait until the power is restored, then be sure
to press ?/1 to turn on the system before ejecting the
tape.