Sony MHC-NX3AV - Manual (Page 18)

18
DOLBY NR
Searching for the beginning of a
track (AMS*)
During playback, turn the jog dial the same
direction as the
ª or · indicator to go
forward. Turn the opposite direction to go
back. (Or press
= or + on the remote.)
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Notes
• The AMS function may not operate correctly
under the following circumstances:
– When the unrecorded space between songs is
less than 4 seconds long.
– If completely different information is recorded
on the left and right channels.
– When there are continuous sections of
extremely low level or low frequency sound
(like those of a baritone sax).
– When the unit is placed near a television. (In
this case, we recommend moving the unit
farther away from the television or turning off
the television.)
• Dolby NR is off and DIRECTION ( A or RELAY)
is ß when the mains AC power supply is
switched off.
Playing a tape (continued)
To Do this
Stop play Press π (or p on the
remote).
Fast-forward Press ) on the remote
while playing the front side
or
0 while playing the
reverse side.
Rewind Press 0 on the remote
while playing the front side
or
) while playing the
reverse side.
Remove the cassette Press § .
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
Tips
• Pressing · or ª when the power is off
automatically turns the power on and starts tape
playback if there is a tape in the deck (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not
work.
• You can switch from another source to the tape
deck just by pressing · or ª (Automatic Source
Selection).
• If the tape you want to play is recorded with
DOLBY NR, you can reduce the noise by pressing
DOLBY NR so that “DOLBY NR” lights up.