Sony PCG-F630 - Manual (Page 58)

Connecting an External Display 43
To select a display
When you connect an external display to the monitor connector, you can
toggle the output between the Liquid Crystal Display (LCD), the external
monitor, or both devices. Use the Fn+F7 keys to select display.
See the manual that came with your projector for more information on installation and
use.
To Press Result
Switch to an
external display Fn+F7 Toggles between the LCD, the external display connected
to the Monitor connector, or both the LCD and external
display.
Projector
Power cord
Audio cable (not supplied) RGB signal cable
to
Monitor
to
i
Only LCD LCD and external display
Only external display