Protect – Sony DSC-HX9V User Manual
Page 170
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Protect
Protect
Protects recorded images against accidental erasure.
The
mark is displayed for registered images.
1. Press the
(Playback) button to switch to playback mode.
2. MENU
(Protect)
desired mode
on the control wheel
(This Image)
Protects the currently displayed image in single-image mode.
(Multiple
Images)
You can select and protect multiple images.
Do as the following after step 2.
Select an image then press
.
Repeat the above steps until there are no more images to be protected.
Select an image with a
mark to release the
mark.
MENU
[OK]
(Set All
Burst Images.)
Protect all images in the selected burst group at once in Display Burst
Group mode.
Press [OK]
after step 2.
(Remove All
Burst Images.)
Release all protected images in the selected burst group at once in Display
Burst Group mode.
Press [OK]
after step 2.
Note
When the internal memory is used to record images, [View Mode] is set to Folder view and
still images and movies are displayed in the same folder.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing
on the
control wheel as the same procedure to protect it. The
indicator disappears, and the
protection is released.
Copyright 2011 Sony Corporation
170