Avaya Remote Access Module 4 - Manual (Page 6)

Page 6 User's Guide
Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002)
2. Equipment Supplied & Required
Before installing, check that you have all the parts and tools required.
Remote Access Module 4 Kit
– The Remote Access Module (IND-RAM4).
– Internal/External Fax Modem Installation CD.
– Wall brackets (two) plus screws (four).
– Plug top 9v DC power supply
– Telephone line lead (2.5m).
– Serial Lead (0.5m) (for PC connection only – see pages 9 and 11).
– This Remote Access Module 4 User's Guide.
– Other items may be included at Avayas' discretion.
Tools & part Required
– Two No. 6 Pan or Round head screws plus suitable wall plug fixings.
– Drill, drill bits and screw drivers for the fitting of the above items.
– Narrow cross-head screwdriver.
– For on-site programming, a PC with comms/terminal package and 9-
pin serial port.
– Serial Lead (CAB-RAM) supplied with the INDeX CU (for INDeX
system programming).
– KSM Cable supplied with the INDeX IVM Server Cassette (SVRC).
Optional :
– The Remote Access Module provides a socket for a standard
telephone. This can then use the direct exchange line when the
modem is not active.