Sony VPL-DX145 - Manual (Page 33)

11 GB
Selecting the Menu Language
Selecting the Menu Language
The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug in the AC power cord into a wall
outlet.
2
Turn on the projector.
Press the ?
/ 1 key.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image
(page 13) .
4
Select the menu language.
1
Press the V or v key to select the
Operation ( ) menu then press
the ENTER key.
2 Press the V or v key to select
“Language ( )” then press the
ENTER key.
3 Press the V/v/B/b key to select a
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
1
3
2
Language English
Status On Status OnStatus
Security Lock Off
Control Key Lock Off
Operation
Sel Set Back