Sony RM-TP504 - Manual (Page 15)

15
Operation
4 Touch to select the recorder component (MD/DAT
in this example).
When MD/DAT is touched, the REC EDIT operation
screen appears.
5
Touch r in RECORDER: MD/DAT, then touch ( in
PLAYER: CD.
Recording starts.
To stop recording at any time
Although recording stops automatically in the above
example, recording can also be stopped at any time by
touching
p in RECORDER.
To stop the recording procedure at any time
Touch FUNCTION to display the FUNCTION screen.
During steps 2 to 3, touching EXIT will also stop the
recording procedure.
This section describes how to record audio from a CD to
an MD as an example of recording audio/video.
Other operations
Recording from a DVD to a video deck is basically the same
procedure. For details on the buttons used in recording, refer to
the operating instructions supplied with the receiver and other
components.
1 Touch FUNCTION.
The FUNCTION screen appears.
2 Touch .
The REC EDIT screen appears.
3 Touch to select the player component (CD in this
example).
Because CD is not displayed, use the JOG DIAL or
touch
$ to scroll downward through the list. If you
scroll to far, touch 4 to scroll back up.
When PLAYER is selected, the receiver’s function
automatically switches to the PLAYER component.
Touching 4 moves list up
Touching $ moves list down
PLAYER
Example: Recording from CD to MD
Starts playback from the CD player
Starts recording on the MD deck.