Sony PCG-GRZ600 User Manual
Page 159
If Windows still does not start, follow these steps to initialize the BIOS:
1.
If there is a disk in the floppy disk drive, then remove it.
2.
Turn off the computer.
3.
Remove any peripheral devices connected to the computer.
4.
Restart the computer.
5.
Press F2 when the Sony logo appears. The BIOS Setup window appears.
6.
Press the Right Arrow key
to select the Exit menu.
7.
Press the Down Arrow key
to select Get Default Values. The message Load default values for all
SETUP items appears.
8.
Press Enter. The Setup Confirmation window appears.
9.
Select Yes, and press Enter.
10. Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again.
11. Select Yes, and press Enter. The computer restarts.
If your computer continues to display the message "Operating system not found," and Windows does not start, use your
supplied System Recovery CDs to restore the programs that shipped with your computer. See
for more information.
The System Recovery CD restores your computer to its original state, so user data and applications will
be lost.
Why does my computer stop responding? Why can't I turn off my computer?
It is best to turn off your computer using the Turn Off Computer option on the Microsoft
®
Windows
®
Start menu, located on
the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.
Click Start on the Windows
®
taskbar, select Turn Off Computer, and then click Turn Off.
If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task
Manager dialog box appears, click Turn Off from the Shut Down menu.
If your computer still does not turn off, press and hold the power button for at least four seconds to turn off the
power.
If your computer stops responding while playing a CD or DVD, press the Ctrl+Alt+Delete keys simultaneously. You
can turn off the computer from the Windows Task Manager.
Pressing the Ctrl+Alt+Delete keys simultaneously or turning off the computer with the power button may cause
loss of data.
Remove the AC adapter and battery.
Why won't my computer enter Standby or Hibernate mode?
Your computer's operating system may become unstable if the operating mode is changed before the computer completely
enters Standby or Hibernate mode.
To restore the computer to normal operating stability:
1.
Close all open programs.
2.
Restart the computer. Follow these steps:
1.
Press the Windows key
.
Page 159