Sony VGX-XL3 - Manual (Page 40)

VGX-XL3 Digital Living System 37
Power Saving Functions
The VGX-XL3 personal computer offers two power-saving function modes,
Standby and Hibernation, which are used to reduce power consumption when
not in use.The table below list the characteristics of each function:
Standby Mode
Power Lamp Orange in color.
State Reduces power consumption because it turns off the
components other than the minimum components
necessary while maintaining the current working
status.
Enter Standby
Mode The three ways to enter Standby Mode are:
• Press the Standby key on the keyboard.
• Click Standby in the computer screen which
displays when selecting Start and then clicking on
> .
• Press the Standby button on the remote control.
Return to normal
operation • Either press the Space key or the Standby key on
the keyboard, or press the power button on the
front of this device.
• Press the Standby button on the remote control.
Hibernation State
Power Lamp Power lamp is off.
State Main power is turned off and the fan for the internal
main power section is paused. Saves the current
working status to the hard disk and turns off the
power for this device.
Enter Hibernate
Mode Click Hibernate which displays when selecting Start
and then clicking on > .
Return to normal
operation Press the Power button on the front of this device.
Note : This device will not return to normal operation
by remote control when in hibernation.