Sony LBT-ZTX7 - Manual (Page 30)

30 GB
Adjusting the sound
To add a sound effect
* The volume switches to power mode and the
equalizer curve changes.
(MHC-GTX888 only)
You can enjoy different sounds by
selecting the sound mode you want.
Press SURROUND SPEAKER
MODE repeatedly.
LINK
Reproduces the same sound with different
output levels.
“LINK” lights up in the display.
MATRIX SURROUND 1
Reproduces a wide range of sound that
can actually sense the size of the room.
“MATRIX SUR 1” lights up in the
display.
MATRIX SURROUND 2
Reproduces a wide range of sound that
can actually sense the size of the room.
The surround sound is reinforced.
“MATRIX SUR 2” lights up in the
display.
You can enhance the sound quality by
using the MP3 BOOSTER+ function.
1
Press OPTIONS.
2
Turn OPERATION DIAL to select
“MP3 BOOSTER+”, then press
ENTER.
3
Turn OPERATION DIAL to select
“AUTO”, then press ENTER.
To exit the OPTIONS menu,
press OPTIONS.
Note
When an audio file is played back, the MP3
BOOSTER+ function is automatically activated
if you have set “MP3 BOOSTER+” to
“AUTO”. “BOOSTER” lights up in the display.
To Do this
Reinforce the
bass and create
a more powerful
sound Press GROOVE
repeatedly until
“GROOVE”* or
“Z-GROOVE”* lights up
in the display.
Set the surround
effect (MHC-GTX787/
MHC-GTX777/
LBT-ZTX7 only)
Press SURROUND
repeatedly until
“SURROUND” lights up
in the display.
Select the preset
sound effect Press PRESET EQ
(or EQ on the remote)
repeatedly.
To cancel, press
PRESET EQ (or EQ on
the remote) repeatedly to
select “FLAT”.
Selecting the sound system
Enhancing the sound quality