Environment concerns, Packaging materials – AEG 73742 User Manual

Page 38

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges

can be adjusted to compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust the door

and tighten the screw again.

• Counter-magnet (6)

The appliance is prearranged for a magnetic

closure of the door. To enable a correct opera-

tion of this device, it is necessary to screw the

counter-magnet (6) (steel disk + rubber ring)

into the inner side of the door.
Its position must correspond to the magnet (4)

on the appliance (see picture D).

If the door has to be opened from left to right, in-

vert the position of the plates (7), the magnet (4)

and the plate (5) (Fig. B and E). Mount the coun-

ter-magnet (6) and the hinges (1) as previously

described.

ENVIRONMENT CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

Packaging materials

The materials marked with the symbol are recyclable.

4
6

Environment concerns