6 ec- echo, 7 bd- baudrate – AEG COMPACT READER ARE I2 User Manual
Page 19
Manual
Page 19 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
D-89077 Ulm
Tel. ++49(0)731-933-1340/1877
Fax ++49(0)731-933-1855
e-mail: [email protected]
6.6 EC- Echo
The command EC changes of the echo function setting.
Input format:
EC
Parameter:
v
Function
0
echo on
1
echo off
Output (example):
0
Note:
The default value of the parameter EC depends on the particular
reader.
6.7 BD- Baudrate
The command BD enables the change of the baud rate. The settings are effective after a warm
start using the RST command.
Input format:
BD
Parameter:
Parame-
ter
Function
0
4800 baud
1
9600 baud
2
19200 baud
Output (example):
2