Frequently asked questions – Sony PCG-GRX690K User Manual
Page 69
Frequently asked questions
Why doesn't the touch pad work properly?
You may have disabled the touch pad without connecting a mouse to the computer. To enable the touch pad:
1.
Press the Windows key
, and then press P to open the Programs menu.
2.
Press Enter.
3.
Press the Down Arrow
key to select Sony Notebook Setup, and press Enter.
4.
Select Sony Notebook Setup again, and press Enter.
5.
Press the Right Arrow key
to select the Device tab.
6.
Press the Tab key to select the left panel, and then press the Down Arrow key
to select Pointing
Device.
7.
Press Alt+S simultaneously. The Mouse Properties dialog box appears.
8.
Make sure the Buttons tab is selected, and press the Up Arrow key
and Down Arrow key
to
change the button assignments. Press the Tab key to move between shortcut menus.
9.
Press Enter to save your changes and close the dialog box.
Restart the computer to activate the touch pad again.
If your touch pad is interpreting a single tap as a double-click, adjust the button assignments. Follow these steps:
1.
Press the Windows
and the E keys. The My Computer window appears.
2.
Click the Tools menu, and select Folder Options. The Folder Options dialog box appears with the
General tab open.
3.
In the Click items as follows box, click to select Single-click to open an item (point to select).
4.
Click Apply.
If you are still experiencing problems, make sure another mouse was not installed.
You may need to use your Application Recovery CD(s) to reinstall the mouse drivers. See
Why doesn't the pointer move when I use the touch pad or mouse?
Restart your computer. Follow these steps:
1.
Press the Windows key
.
2.
Press U. The Shut Down Windows dialog box appears.
3.
Press R to restart the computer.
4.
Press Enter.
If the computer does not restart,
1.
Press Ctrl+Alt+Delete simultaneously. The Windows Security dialog box appears.
2.
Press the Right Arrow
key to select Shut Down.
3.
Press Enter.
4.
Press R to select restart.
Page 69