Sony PCWA-A100 - Manual (Page 6)

Registering the Access Point
Register the Access Point to use for communication on the Wireless Palette. When you have two or more Access Points, you can
select the Access Point you want to use by registering every Access Point. You may register up to four Access Points.
1. Double-click the Wireless Palette icon on the task tray.
The Wireless Palette appears.
2. Click the Tool Box button .
The Tool Box dialog box appears.
3. Click Add.
The Add New Access Point dialog box appears.
4. Specify the Nickname, Access Point ID, and Encryption Key.
Nickname
Enter the nickname for the Access Point. You may enter up to eight alphanumeric characters.
Access Point ID
Enter the ID for the Access Point that you want to register. The Access Point ID is printed on the ID label on the bottom
surface of the Access Point.
If you have checked Peer to Peer, enter a string of up to 32 alphanumeric characters.
Encryption Key
Enter the Encryption Key specified for the Access Point you are registering with Access Point Setup Utilities, if you want
encrypted wireless communication.
If the Encryption Key is not specified for the Access Point, no wireless communications are encrypted. If so, leave this field
blank.
Notes
o Enter the Encryption Key that you specified using one of the Access Point Setup Utilities for Encryption Key on the Wireless
Palette.
o Ask your Access Point manager for the Encryption Key.
Hint
Change the Encryption Key as follows:
o Change the Encryption Key using one of the Access Point Setup Utilities.
o When you have changed the Encryption Key, register the Access Point as a new entry using the Wireless Palette.
(1)If only one Access Point is registered on the Wireless Palette,
Page 6