Sony VPL-DW125 - Manual (Page 6)

6
Location and Function of Controls
c Operating a menu (page 16)
MENU key
RESET key
ENTER /
V/v/B/b (arrow) keys
RETURN key
d Adjusting the image (page 12)
ASPECT key (page 18)
KEYSTONE key (page 14)
PATTERN key
This function is not available.
APA (Auto Pixel Alignment) key
*
(page 14)
* Use this key when inputting a computer
signal via the RGB input connector
(INPUT A).
e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
*
Enlarges the image with the center of it
as a starting point while projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you want to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
BLANK key
Cuts off the projected image
temporarily. Press again to restore the
previous image. Picture muting helps
reduce power consumption.
MUTING key
Mutes the audio output temporarily.
Press again to restore the previous
volume.
VOLUME +/– key
Adjusts the volume output.
FREEZE key
This function is not available.
*: Use this key when inputting a computer
signal. But it may not be used
depending on the resolution of the input
signal.
f Setting the energy–saving mode
easily
ECO MODE key
Energy-saving mode can be set easily.
Energy-saving mode consists of “Lamp
Mode,” “With No Input,” “With Static
Signal” and “Standby Mode.”
1 Press the ECO MODE key to display
the ECO Mode menu.
2 Press the V/v key or ECO MODE key
to select “ECO” or “User” mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Low
With No Input: Standby
With Static Signal: Lamp
Dimming
Standby Mode: Low
User: Sets each item of the ECO
mode menu as you desire (go to
step 3).
3 Select “User” then press the b key.
The setting items appear.
4 Press the V/v key to select the item
then press the ENTER key.
5 Press the V/v key to select the setting
value.
Note
Note
RETURN
ECO
User
ECO Mode
:Sel :Back
ECO Mode Menu
RETURN
Lamp Mode High
Auto Power Saving
Standby Mode
Off With No Input
Lamp Dimming With Static Signal
Standard
User
:Sel :Set :Back