beautypg.com

Using the e-mail report function, Using the e-mail report, Function – Sony VPL-DW125 User Manual

Page 30

background image

30

Using Network Features

Set the e-mail report function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].

1

Click on [Owner information] to enter
the owner information recorded in the

e-mail report.

2

Set the timing of the e-mail report.

Click on [Mail Report] to open the Mail
Report page.
Lamp Reminder (Lamp1): Set the

timing of the email report for lamp
replacement. To reset Lamp
Reminder, execute “Lamp Timer
Reset” on the projector (page 22).

Maintenance Reminder: Set the timing

of the email report for maintenance. To
reset Maintenance Reminder, check
the RESET check box and then click
on [Apply].

3

Enter the outgoing e-mail address in
the Email Address box then check the
Report Timing check box of the e-mail
report to be sent.

4

Set the mail account for sending e-
mail reports.

Mail Address: Enter the e-mail address.
Outgoing Mail Server (SMTP): Enter

the address of outgoing mail server
(SMTP).

Required Authentication: Check this

check box if authentication is required
for sending e-mail.

Requires the use of POP

Authentication before sending email
(POP before SMTP):
Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.

Incoming Mail Server (POP3): Enter

the address of the incoming-mail
server (POP3) to be used for POP
authentication.

Account Name: Enter the mail account

name.

Password: Enter the password.

Using the e-mail report
Function

1

Owner information button

2

3

4

6

5

Mail Report button

This manual is related to the following products: