Turning on the nav-u unit – Sony NV-U83T User Manual

Page 10

Turning On the nav-u Unit

1. Ensure that you are in an open area and that the nav-u device has a

clear view of the sky.

2. Press on/standby button
3. Follow the on-screen instructions of the Startup Configuration Wizard

before first use

4. Wait while the nav-u device calculates current location using GPS

satellite signals.

Note: This could take as long as 10 minutes during the first use of your nav-u.

Current position icon will turn
red to indicate sufficient GPS
signal strength

Note: Before first GPS Signal is found, default map position is home address entered in #2,

or Washington, DC if no home address has been entered.

RED:
Locked on GPS signal; position fixed

GREY:
Inadequate GPS signal; position not fixed

ORANGE:
GPS signal lost; using POSITION Plus
to estimate position