Sony PCG-NVR23 - Manual (Page 70)

To connect a multimedia computer display
1. Turn off the computer before you connect the multimedia computer display.
2. Locate the AV Out jack on the left panel of the computer.
3. Plug one end of the display cable (not supplied) into the AV Out jack, and plug the opposite end of the display
cable into the multimedia computer display.
4. Verify that the power cord is plugged into the multimedia computer display and an AC outlet.
5. Turn on all external devices before you turn on the computer.
Connecting a Multim edia Com puter Display
Once you connect the external display to the computer, you can use Fn+F7 to toggle between the LCD, external
display, and both LCD and external display. See Combinations and functions with the Fn key for more information.
See the manual that came with your multimedia computer display for more information on its installation and use.
Page 70