Sony PCG-NVR23 - Manual (Page 21)

Inserting a disc
When the computer is in Standby or Hibernate mode, you cannot insert a disc. See Controlling Power Consumption for
more information on Standby and Hibernate modes.
1. Turn on the computer.
2. Press the Eject button to open the optical disc drive. The tray slides out.
Ejecting the Tray
Avoid using adhesive labels to identify your discs. Adhesive labels may come off while the disc is in use in your
optical disc drive and may cause damage to the unit.
3. Place an optical disc on the tray with the label side facing up. For DVDs that can played on both sides, the side of
the disc facing up is the side that plays.
4. Press the disc onto the hub until the disc clicks securely into place.
Inserting an Optical Disc
Make sure to seat the disc firmly over the hub fingers. If you do not seat the disc firmly, you could
damage your optical disc drive, and you may not be able to open the tray.
5. Push the tray gently to close it.
Page 21