Sony VGN-TX690P - Manual (Page 10)

8
Inserting/Removing a Memory Stick Media
Your computer is equipped with an Memory Stick media slot on the front. You can
only insert one Memory Stick media at a time.
To insert a Memory Stick media
1 Insert the Memory Stick media with the arrow facing up and toward the
Memory Stick media slot.
2 Carefully slide the Memory Stick media into the slot until it clicks into place.
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you
insert it into the slot. To avoid damaging the computer or the Memory Stick media, do not force
the Memory Stick media into the slot if it does not insert smoothly.
Do not insert more than one Memory Stick media into the Memory Stick media slot. Inserting the
media improperly may damage the computer.
Your computer supports Memory Stick Duo media and is equipped with the Memory Stick combo
slot that is compatible with both standard- and duo-size media.
To remove a Memory Stick media
1 Make sure that the Media Access indicator is off.
2 Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.
3 Pull the Memory Stick media carefully out of the slot.
Always remove the Memory Stick media gently, or it may pop out unexpectedly.
Do not remove the Memory Stick media while the Media Access indicator is turned on. If you do,
you may lose data. Large volumes of data may take time to load, so be sure the indicator is off
before removing the Memory Stick media.