Sony MZ-M100 - Manual (Page 87)

87
Note on digital recording
This recorder uses the Serial Copy Management System, which allows only first-generation digital
copies to be made from premastered software. You can only make copies from a home-recorded disc by
using the analog (line out) connections.
Restrictions on the editing of tracks transferred from your
Windows computer
This unit was designed so that editing functions (i.e., adding track marks and erasing track
marks) do not function for tracks that have been transferred from your Windows computer. This
is to prevent the loss of transfer authorization by the transferred tracks. To edit these tracks, first
transfer them into the computer, and then edit them on the computer.
About the DSP TYPE-S for ATRAC/ATRAC3
This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks
equipped with digital signal processors (DSP). This specification allows the recorder to produce
high-quality sound from tracks recorded in MDLP mode. Since it retains DSP TYPE-R support,
the recorder produces superior results during playback in SP (normal stereo) mode.
Suppressing the skips of the sound (G-PROTECTION)
The G-PROTECTION function was developed to provide a higher level of shock resistance than
that of existing players.
Premastered software such as CDs or MDs.
Digital recording
Home-
recorded
disc No
digital
recording Recordable
disc
Microphone, record player, tuner, etc. (with
analog output jacks).
Analog recording
No
digital
recording Recordable
disc
Digital recording
Home-recorded disc
Recordable
disc