Sony NW-E103PS - Manual (Page 20)

20
Playing specified
sentences repeatedly
(Sentence Repeat)
This function automatically detects only
voice data from the setting point and repeats
the voice data for setting counts. This is
useful for language-learning material which
has no background music.
z Tip
The default repeat counts setting is 2 times for one
sentence. But you can change the repeat counts
setting. Refer to “Setting the repeat counts” on page
21.
1
Select the Sentence Repeat mode
(Sentence Rep) (page 17).
2
Press the Nx button to start
playback.
Repeat mode
3
Press the REPEAT/SOUND button
to place the setting point during
playback.
The Network Walkman detects spoken
sections and non-spoken sections from
the set point, and Sentence Repeat starts.
(The spoken section is repeated once
(during detection), and the setting is
counted.)
1 : 0 2 0 1 0
Notes
• You cannot use Sentence Repeat in the Group
mode, or when the current time is displayed.
• A spoken or non-spoken section of less than 1
second will not be detected.
• If a non-spoken section is not detected until the
track end, the track end point is recognized as a
non-spoken section and Sentence Repeat begins
from the previous spoken section.
To clear the setting point
• Press the REPEAT/SOUND button during
Sentence Repeat playback.
• Press the MENU button during Sentence Repeat
playback.
• Select the Group mode by setting the GROUP/
HOLD switch to (GROUP) during Sentence
Repeat playback.
• Select the previous or next track by pressing the
.–/+> button during Sentence Repeat
playback.
(The Sentence Repeat mode is not canceled.)
To cancel the Sentence Repeat mode
Change the Repeat mode in the menu screen (page
17).
Nx button
.–/+> button
REPEAT/SOUND
button