ATEN ALTUSCN KH1516I - Manual (Page 28)

KH1508i / KH1516i User Manual
16
6. Power up the installation according to the following procedure:
a) Power up the First Station. Wait for the unit to ascertain its Station ID
and display it on the Station ID LED. (The Station ID for the First Stage
unit is 01, the ID for the Second Stage unit is 02, the ID for the Third
Stage unit is 03, etc.)
b) Power on each station in turn (Second Station, then Third Station, etc.).
In each case, wait for the Station ID to be ascertained and displayed
before powering on the next station.
c) After all the Stations are up, power on the computers.
Daisy Chain Installation Diagram
KH1516i
KH1516
KH1516