beautypg.com

Zebra remaining flash level redeye reduc – Sony HDR-SR5 User Manual

Page 66

background image

66

Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting,

is displayed. The zebra pattern

is not recorded.

B

OFF

The zebra pattern is not displayed.

70

The zebra pattern appears at a screen
brightness level of about 70 IRE.

100

The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.

b

Notes

• Portions of the screen where brightness is about

100 IRE or above may appear overexposed.

z

Tips

• IRE represents the screen brightness.

B

AUTO

Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.

– When your camcorder recognizes the

remaining hard disk capacity with the
POWER switch set to

(Movie).

– When you press DISP/BATT INFO to

switch the indicator from off to on with
the POWER switch set to

(Movie).

– When you select the movie recording

mode on the HOME MENU.

ON

Always displays the remaining hard disk
indicator.

b

Notes

• When the remaining recordable time for movies

is less than 5 minutes, the indicator stays on the
screen.

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.

HIGH(

)

Makes the flash level higher.

B

NORMAL( )

LOW(

)

Makes the flash level lower.

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] to [ON], then press

(flash) (p. 30) repeatedly to select a

setting.

(Auto redeye reduction): Pre-flashes to

reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r

(Forced redeye reduction): Always

uses the flash and the redeye reducing pre-
flash.
r

(No flash): Records without flash.

b

Notes

• The redeye reduction may not produce the

desired effect due to individual differences and
other conditions.

ZEBRA

REMAINING

FLASH LEVEL

REDEYE REDUC

This manual is related to the following products: