Sony VGN-T150 - Manual (Page 111)

Connecting the Port Replicator
When using the port replicator, always use the AC adapter to power the port replicator; otherwise, the port
replicator will be without power and will not function properly. Also, take precautions to avoid disconnecting the AC
power supply when moving the computer with the port replicator attached.
Before you connect the port replicator, you may want to install the rechargeable battery, if it is not already installed. The
installed battery automatically charges while the computer and port replicator are powered by the AC adapter.
Connecting a port replicator while the computer is in a power saving mode (Standby or Hibernate) may result in data
loss or a computer malfunction.
To connect a port replicator
1. Close active programs to prevent data loss.
2. Turn off the computer, and disconnect all attached devices.
3. Place the port replicator on a stable surface
4. Align the sides of the computer with the sidewalls of the port replicator, and gently place the computer on top of
the port replicator until it clicks into place.
Connecting the com puter and port replicator
5. Gently push the computer onto the port replicator until it clicks into place. Make sure the port replicator is
securely fastened to the computer.
6. Plug the AC adapter into the DC IN port on the port replicator, and plug the power cord into the AC adapter and
an AC outlet. The power indicator (marked "DC IN") on the port replicator turns on.
Connecting the AC adapter to port replicator
7. Press the Power button to turn on the computer.
Page 111